![]() If the blade were allowed to go all the way through the metal, then the key would not be able to be inserted two ways. This remainder of metal allows the other side of the key to be cut with the exact same path. These types of keys could not be cut correctly by bringing a blade down because metal needs to remain as a bottom to the carved path. This blade can be used to trace the path on slider keys. The cutting tool that these machines use is a small hardened steel router blade. The most important thing to know about these cutters is that they do not, in any way, use a laser. Keys that need a laser cutter will have their bitting on the side of the key. If you do not have a spare car key, you will need additional assistance. The original key can be left in place, because both sides of the key will have the same bitting pattern. To do this the key blank key is simply moved so that the other side can be cut. In order to use this machine to duplicate car keys, you will have to cut both sides of the new key. From there, the alignment of the keys in relation to each other needs to be checked. The cutting edge of the blade needs to be completely lined up with the leading edge of the alignment tool. The slot for the blank key will line up with a blade, and the working key will be positioned against the alignment tool. If the machine is more manually operated, then the locksmith will place the bank key in the machine in a different slot. This key can be scanned for its code at this time, and may be removed. The machine works by fixing the current key into place. If you can make a house key on the key cutter, then it is a traditional key cutter. Traditional Key CuttersĪ traditional key cutter can be used to cut any key that has its bitting on the top and/or bottom of the key blade. The two main types of Car Key Duplicators are: 1. The type of key you are duplicating will also determine what machine you can use to make duplicate car keys. The automated machines still require quite a bit of training and knowledge, but certain steps in the process remove the human from interacting with the key. The less automation, the more skill is required. That is the rule of thumb for locksmithing. On your run of the mill key duplicator, the amount of skill required for precise operation is relatively high. The main factors that the machine will influence are the steps of the process, the time it takes to complete the duplicate car key, and the precision of the cuts. ![]() The machine that is used for car key duplication will determine a lot about the methodology. Transponder keys can be programmed by our auto locksmiths, but this is a separate service. If this key also requires a transponder chip to be programmed, then that will need to be done before the key will start your car. When a locksmith talks about duplicating a car key, they are talking about using an existing key that has bitting on its key blade, to cut a blank key for the same model of car to have the same bitting. It depends on the complexity of your key.
0 Comments
Leave a Reply. |